2008 XYZ 2280

2008 Used XYZ 2280, so a Colchester Mascot x 80" clone built in Taiwan. Runs really well, has 3-Axis DRO Z, X & compound slide) Come with 3 & 4 jaw chucks, steadies and quick change tool post holders.

Specification:

• Spindle Bore Diameter: Typically 80 mm to 105 mm (3.15" to 4.13" "Big Bore" configurations common for this machine class).
• Spindle Nose Mount: D1-8 Camlock (or D1-11 depending on the specific model variation year).
• Spindle Taper: MT7 internal taper (uses an MT5 sleeve adapter).
• Spindle Speed Steps: 12 to 16 speeds or Variable Speed (VS) electronic control depending on whether it has a geared or VS headstock.
• Speed Range: Typically 25 to 1,600 RPM.

• Feeds & Thread Cutting CapacitiesMetric Threads: Wide variety (up to 47 kinds) from 0.2 to 14 mm pitch.
• Imperial (Inch) Threads: Wide variety (up to 60 kinds) from 2 to 112 TPI.
• Module Threads: Up to 39 types from 0.1 to 7 mm.
• Diametral Pitch (DP): Up to 50 types from 4 to 112 DP.
• Longitudinal Feed Range: 0.05 to 1.5 mm/rev (approximate standard for this gear set).
• Cross Feed Range: 0.02 to 0.4 mm/rev.

• Carriage, Slide & Bed SpecsBed Width: 350 mm to 400 mm (Heavy-duty induction hardened and ground twin-V bedways).
• Gap Width (Length in front of faceplate): 150 mm to 200 mm.
• Cross Slide Travel: 300 mm to 330 mm

• Top Slide (Compound) Travel: 130 mm to 150 mm.
• Leadscrew Diameter & Pitch: 40 mm diameter with a 4 TPI or 6 mm pitch.

• Tailstock SpecificationsTailstock Quill Diameter: 75 mm.
• Tailstock Quill Travel: 180 mm to 200 mm.
• Tailstock Internal Taper: Morse Taper No. 5 (MT5)

• Electrical & Drive PowerMain Spindle Motor: 7.5 kW to 11 kW (10 HP to 15 HP) 3-phase industrial motor.
• Coolant Pump Motor: 0.12 kW (1/8 HP).
• Voltage Requirement: 415V / 3-Phase / 50Hz